Philipp Kreutzer
Всего сообщений: 17
Дата регистрации: 17.03.2011
|
Создано:
17.03.2011 12:17:03
|
Dear Developers,
I am using 3 monitors with a graphics card that only supports 2 monitors, one of which I use all the times (lets call it A). The second one is on my desk as well (B) and I use it while writing and playing games. When I want to acticate my third display (my television, for the sake of playing games cloning the display ©), I have to go all to the Windows Screen Resolution Panel and change all the information there. I think it would be great if you could choose this from the AMM right klick menu, so you disconnect B to activate C and take over the settings from B to C or to dissconnect B and to clone the desktop from A on C. I don't know if this is possible, but it would make the handling of three monitors way easier.
Best wishes,
P. Kreutzer
|
Vasiliy Ivachev
Администратор
-retired-
Всего сообщений: 2073
Дата регистрации: 09.11.2010
|
Создано:
17.03.2011 22:44:41
|
Hello Philipp,
Thanks for the post.
You could use Desktop Profiles to set active devices(and switch them pressing Win+W by default).
You could use the standard Win+P to switch between Extend, Duplicate...
Please, inform me about your results.
Best regards.
|
Philipp Kreutzer
Всего сообщений: 17
Дата регистрации: 17.03.2011
|
Создано:
18.03.2011 06:54:39
|
Dear Vasiliy,
thanks for the ideas, but regrettably they do not help.
The Desktop Profiles only recognize active monitors (which my TV is not while I am using the other 2), and the Win+P only switches between the two displays that are identified as monitors 1 and 2 by Windows, the monitor on my desk is 3, therefore it won't allow me to switch to that one once I swapped to the TV via the Windows Keys.
The solution would be to make the Desktop Profiles enable and disable monitors (so basically the ability to choose a disconnected display in the dropdown which will activate when activating the profile).
Best wishes,
Philipp
|
Vasiliy Ivachev
Администратор
-retired-
Всего сообщений: 2073
Дата регистрации: 09.11.2010
|
Создано:
21.03.2011 00:32:36
|
Hello Philipp,
Thanks for the reply.
The option that would solve your problem will be realized in the next version (probably in the next beta version).
Best regards.
|
Philipp Kreutzer
Всего сообщений: 17
Дата регистрации: 17.03.2011
|
Создано:
21.03.2011 05:17:14
|
Hello Vasiliy,
that sounds great. I really appreciate the work you are doing.
Best wishes,
Philipp
|
Philipp Kreutzer
Всего сообщений: 17
Дата регистрации: 17.03.2011
|
Создано:
25.05.2011 13:42:58
|
Hello Vasiliy,
I wanted to say thanks for implementing this feature. Win+W is magic! Though the hotkeys for the profiles do not seem to work, Win+W does. Thanks a lot!
Best wishes,
Philipp
|
Vasiliy Ivachev
Администратор
-retired-
Всего сообщений: 2073
Дата регистрации: 09.11.2010
|
Создано:
26.05.2011 00:35:37
|
Hello Philipp,
Thanks for the message.
| Цитата |
|---|
| Though the hotkeys for the profiles do not seem to work, Win+W does. |
Best regards.
|
Alex Fadeyev
Администратор
Moderator
Всего сообщений: 1453
Дата регистрации: 30.09.2005
|
Создано:
25.08.2011 15:08:36
|
Profile hotkeys have been fixed in the version 3.3 of AMM - please check it out.
|
