Waveslate
Всего сообщений: 5
Дата регистрации: 29.11.2024
|
Создано:
12.12.2024 18:01:55
|
 |
Hello everyone,
I'm experiencing an issue with Save Idle Screens on one of my monitors and could use some help. Here’s my setup and the problem:
I have a 3-display setup connected to my PC:
• Primary Monitor: Samsung G60SD OLED (connected via DisplayPort 1.4, running at 360Hz)
• Secondary Monitor: Standard monitor (connected via DisplayPort 1.4, running at 60hz)
• TV: Connected via HDMI and running at either 60hz or 120hz, depending on what I'm doing
Idle Screens used to work flawlessly across all three displays. However, a few days ago, I changed my primary monitor to the Samsung G60SD OLED, and now the screensaver doesn’t work properly on this display.
Here’s what happens:
Upon restarting my PC, the screensaver activates on all three displays. If I dismiss the screensaver on the primary monitor (Samsung G60SD OLED), it won't activate again on that monitor until I either:
1. Restart the PC, or
2. Go into the AMM settings, change the screensaver to something else, and apply the changes.
This issue is specific to the primary monitor—Idle Screens continue to work as expected on my secondary monitor and TV. Does anyone know what could be causing this or how I can fix it?
Thanks in advance for any advice!
|
Alex Fadeyev
Администратор
Moderator
Всего сообщений: 1452
Дата регистрации: 30.09.2005
|
Создано:
14.12.2024 00:25:21
|
Hello,
Thank you for your request.
Please send us your configuration: open the Configuration window, go to the "Tools > Configuration" panel and click there the .
|
