Actual Tools
Логотип Actual Tools
 ГЛАВНАЯ 
 ПРОДУКТЫ 
 СКАЧАТЬ 
 КУПИТЬ 
 ПОДДЕРЖКА 
 КОМПАНИЯ 
Actual Tools
Новости в формате RSS Новости
Главная / Форумы / Technical Support
Список форумов
Новые темы
Список тем
Поиск по форумам
Помощь
Войти
Регистрация

Сообщения 1 - 10 из 20
Начало | Пред. | 1 2 | След. | Конец 

Тема: «Taskbar resizes to half of the 2nd screen after system boots » в форуме: Technical Support   Просмотров: 33730
 
Xantek
 
Всего сообщений: 12
Дата регистрации: 12.10.2016
Создано: 12.10.2016 16:41:55
 
 
Hello!
I have a problem with my AMM taskbar. After i have changed my 2nd monitor to fhd (previous one was 1440x900) i have a problem with taskbar on the 2nd screen. After windows boots up, the taskbar on the 2nd monitor resizes to half of the screen. I have been trying to repair this problem, i reinstalled AMM and again configured it, but it doesn't help.

AMM 8.9.1
Windows 8.1 64 bit
 
Наверх
Bogdan Polishchuk
Администратор
 
Всего сообщений: 4114
Дата регистрации: 04.04.2012
Создано: 13.10.2016 05:52:53
 
 
Hello, Xantek

On what side of the monitor the AMM taskbar is located? Have you tried to move the taskbar to different sides of the monitor? Does the problem persist then?

Are you able to change the resolution of the Full HD monitor to 1440x900 and see whether the problem still persists?

Could you send us your configuration files using the Send to Tech Support tool (Configuration module > Tools > Configuration > Send to Tech Support)?

Best regards.
 
Наверх
Xantek
 
Всего сообщений: 12
Дата регистрации: 12.10.2016
Создано: 13.10.2016 22:44:55
 
 
Hey!

Taskbar is located on default side (down). Also i have tried to change side of the taskbar, but i don't know if it helps because the problem doesn't show always (I forgot to tell about it). I have turned off and on my computer a few times and it didn't happen on right side (tested side) and down side (default). Moreover, I cannot change my resolution to 1440x900 anymore, because it's 16:10 resolution and my current monitor is 16:9 (my driver and AMM don't have option to change resolution to 1440x900).

Here are my configuration files.
https://drive.google.com/file/d/0B8IYB0yYymjwVUw1YVRBWHpjdEE/view?usp=sharing
 
Наверх
Bogdan Polishchuk
Администратор
 
Всего сообщений: 4114
Дата регистрации: 04.04.2012
Создано: 25.10.2016 17:09:28
 
 
Hello, Xantex

How often (for example "approximately 2 times out of 10 reboots") does the problem happen?

Do you have any additional toolbars on the AMM taskbar?
 
Наверх
Xantek
 
Всего сообщений: 12
Дата регистрации: 12.10.2016
Создано: 25.10.2016 22:57:57
 
 
It happens about 50% of all rebots. I don't have any additional toolbars.
 
Наверх
Bogdan Polishchuk
Администратор
 
Всего сообщений: 4114
Дата регистрации: 04.04.2012
Создано: 29.10.2016 20:38:06
 
 
Xantek,

Could you send us your configuration when your both monitors are enabled?

What version were you running when the problem appeared? If you were running the latest version, could you install the version 8.8.3 and see whether the problem persists?
 
Наверх
Xantek
 
Всего сообщений: 12
Дата регистрации: 12.10.2016
Создано: 30.10.2016 17:18:27
 
 
Now I'am using 8.9.1 version, but before this update, I had 8.9 version and the problem was the same, I'll try with 8.8.3 version.

My current config (both screens enabled):
https://drive.google.com/file/d/0B8IYB0yYymjwNmNMRVNxUFVVbTA/view?usp=sharing
 
Наверх
Bogdan Polishchuk
Администратор
 
Всего сообщений: 4114
Дата регистрации: 04.04.2012
Создано: 01.11.2016 17:47:05
 
 
Xantek,

Unfortunately, the configuration you've provided doesn't contain the important files that we need for investigation and it seems like this archive file was created with the Backup tool.

Could you create a configuration .zip file using the Send to Tech Support tool instead? Remember, that we need a configuration file created when two displays are enabled.
 
Наверх
Xantek
 
Всего сообщений: 12
Дата регистрации: 12.10.2016
Создано: 01.11.2016 19:47:40
 
 
Oh yes, sorry, i forgot to use Send to Tech Support. Now it should be ok. :)

https://drive.google.com/file/d/0B8IYB0yYymjwZi03S2pzSUF4LVk/view?usp=sharing
 
Наверх
Alex Fadeyev
Администратор

Moderator
 
Всего сообщений: 1452
Дата регистрации: 30.09.2005
Создано: 04.11.2016 16:17:16
 
 
Xantek, thank you for the update.

What about rolling back to version 8.8.3? Does the issue remain there?
 
Наверх

Сообщения 1 - 10 из 20
Начало | Пред. | 1 2 | След. | Конец 

Читают тему
гостей: 1, пользователей: 0, из них скрытых: 0


Список форумов
Новые темы
Список тем
Поиск по форумам
Помощь
Войти
Регистрация